|
* Test reports will show PASS/FAIL
NOTE: the Inspection Authorization test is only available at
selected testing centers.
Acceptable Forms of Authorization:
Form 8610-1, "Mechanic's Application for Inspection Authorization". Item 14 on
the form should be completed, including inspector signature, endorsement block
checked, and office identification provided. NOTE: After reviewing Form 8610-1 for
proper completion and endorsement, proctors shall retain the form. When the
applicant has completed the test and been issued a test report, the original
Form 8610-1 shall be destroyed. The testing center may retain a COPY of the form
for record keeping purposes.
Failed, passing or expired Airman Test Report, provided the applicant still has
the ORIGINAL test report in his/her possession. (See RETESTING explanation.)
Retesting:
Requires a 90-day waiting period for retesting.
Applicants taking retests AFTER FAILURE are required to submit the applicable
score report indicating failure to the testing center prior to retesting. The
original failed test report shall be retained by the proctor and attached to the
applicable sign-in/out log. The latest test taken will reflect the official score.
Applicants retesting IN AN ATTEMPT TO ACHIEVE A HIGHER PASSING SCORE may retake
the same test for a better grade after 30 days. The latest test taken will reflect
the official score. Applicants are required to submit the ORIGINAL applicable
score report indicating previous passing score to the testing center prior to
testing. Testing center personnel must collect and destroy this report prior to
issuing the new test report.
|
